Lindemann ensures that your chimney liner installation or replacement goes smoothly.Chimney liners serve as an extra layer between the inside of the chimney and the framing of your home. Chimney defects, no matter how small, can begin a process that will further erode the chimney. Gases can leak through into your home, causing potential health risks, threatening your family’s health and safety.
There are three main types of chimney liners. These include clay tile liners, cast-in-place liners, and metal liners. All three types provide adequate protection, but which liner is appropriate for your home should be determined by a professional.
Homes built prior to the 1940’s were typically built without a chimney liner. As a result, chimney and house fires were more common. Today, there are a few reasons why you may need a new liner: If your chimney has no liner, if it was installed improperly, or if it’s deteriorating or defective.
Combustible creosote or soot can also escape through these openings and build up outside the chimney flue liner. If the creosote were to catch fire in this area of your chimney, serious damage can occur, because the fire can no longer be contained within the flue.
Blockage in a furnace flue is extremely hazardous because it can cause carbon monoxide fumes to enter your home. One of the most common problems that can occur with chimneys is blockage, regardless of what type of furnace fuel is used.
Your certified chimney specialist will be able to show you pictures and explain in detail the reasons you need a fireplace liner. Understanding the reasons, a liner is recommended is going to help you make the best investment decision for your home and your peace of mind.
Advanced technology such as the “Chim Scan” has become a standard in our industry and the pictures are now clearer and more defining than ever. Chimney fires can destroy the integrity of the fireplace flue. Deterioration is commonly caused by age, moisture and poor maintenance. Then there are animals, lightning and storms that can cause damage you may never notice.
Furnaces, boilers, and hot water tanks exhaust large quantities of water vapor during the normal combustion process of natural gas. Oil and gas furnaces produce by-products which can erode the flue lining. Any type of furnace liner that is breached can cause a fire, since heat can reach combustible parts of the home.
Clay liners that have gaps or cracks, allow this moisture into the interior structure which eventually deteriorates the masonry structure from the inside out. Additionally, gases vented from gas burning appliances can escape the lining and migrate into the home.
When we install a fireplace flue liner, we use only the best stainless-steel flexible fireplace liner available on the market today. We then insulate keep the liner in place with “Thermix” insulation. The insulation comes in bags and is mixed with water on site and poured into the void between your new liner and the surrounding chimney.
The next step is removing the obsolete throat damper so we can “parge” the smoke chamber and then we install a new Energy Top Plus Damper. This process guarantees that your fireplace flue is in optimum condition for burning wood. The fireplace liner has a lifetime warranty and the Lindemann name to back it up.
Parging simply means applying a coat of Refractory Mortar to the brick surfaces of the chimney’s smoke chamber to make the surface smooth. The smooth surface allows the smoke to draft up the chimney more efficiently.
Refractory cement fills in any cracks or holes that may have existed in the smoke chamber, ensuring your chimney meets the standard for clearance to combustibles. This is the heat protection you need for the hottest section of your fireplace.
This is the smoke chamber looking up to the chimney flue. You can see bricks with holes in them and missing mortar in the image on the left. Heat and sparks can escape into the combustible surfaces behind the smoke chamber.
Now that the chamber is sealed and the fireplace liner is in place, smoke can flow smoothly up the chimney. [As shown in the photo] There are no cracks or holes to endanger your home from heat, sparks or flue gasses.